Double Drainer

A range of single bowl double drainer sinktops that achieve levels of performance and ergonomic efficiency through being moulded as completely homogeneous seamless units.

Sinktops include an integrally moulded central sink with sloping drainers to each side and moulded edging all round. A flat area is provided to the rear of the sink on which to mount any taps required. It is possible to cut and re-edge the sink-units to give a reduced width.

All these sink-units have ribbed drainers and the design of each unit is slightly different. Detailed drawings can be supplied on request.

Diagrams

Standard Double Drainer Sink-unit Sizes

All Simmons Standard Double Drainer Sink-units listed in the table below have sloping ribbed drainers. It is possible to trim and re-edge the sink-units to give a reduced width B.

When ordering please state the following information:
- the sink unit type (e.g. DD1500)
- the overall size of the unit required
- details of any tap holes required
(hole diameters & positions).

Standard Double Drainer Sink-unit Sizes

Sink-Unit Code	Length	Width (Min)	Width (Max)	Bowl Position	Sink Bowl Size	Waste C/L From Rear	Waste Position	Intenal Radius	Weight KG
	A	B	B	C	length x width x depth	H		R
DD1350	1350	650	760		600 x 450 x 250		rear
DD1500	1500	650	750	150	450 x 365 x 200		rear
DD1500 X	1500	650	750	100	600 x 450 x 250		rear
DD1500 F	1500	650	650	100	450 x 365 x 200		rear		28
DD1650	1650	650	650	120	635 x 370 x 270		rear		34

All dimensions in millimetres.
Sizes shown are nominal. There can be slight variations from sink to sink due to the nature of epoxy resin.