Special
Hexagonal SinkA six sided sink designed for educational laboratories so that up to six students can have easy access to the sink. The sink can be fitted as an underslung or a drop-in type into any worktop material. It can also be fitted flush into a Simmons epoxy worktop. |
 |
Circular sinksTwo sizes and configurations of circular sink are offered: - The C40 sink (see picture right) is suitable for fitment as drop-on, drop-in, underslung, into any worktop material and flush-fit into a Simmons epoxy worktop. - The SC8-C is suitable for underslung fitment, into any worktop material and flush-fit into a Simmons epoxy worktop. Please note this sink is cylindrical in shape and different to the C40 shown on the right. |
 |
D-SinksA range of sinks in an D-shape, as opposed to the more traditional rectangular sink shape. Suitable for fitment as drop-on, drop-in, underslung, into any worktop material and flush-fit into a Simmons epoxy worktop. |
 |
TroughsA number of troughs are available (sizes detailed in the table below) These are commonly used at the rear of fume cupboard bases, especially in water wash cupboards. The troughs are designed for undermount fitment. |
 |
Product Dimensions
| Sink Code | Type | Internal Length | Internal Width | Internal Depth | External Height | Flange Width | Flange Thick-ness | Waste C/L From Side | Waste C/L From Rear | Intenal Radius | Weight KG | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | R | ||||
| SH20-DO | Hexagonal | 679 | 779 | 180 | 198 | 29 | 6 | 14 |  |
|||
| C40-DO | Circular | Ø400 | Ø400 | 188 | 205 | 35 | 8 | 200 | 200 | 200 | 6 | |
| SC8-C | Circular | Ø300 | Ø300 | 150 | 175 | 25 | 14 | 150 | 150 | 150 | 6 | |
| D6-DO | D-shape | 355 | 405 | 200 | 215 | 36 | 9 | 177.5 | 85 | 28 front/ 108 rear |
7 | |
| D9-DO | D-shape | 555 | 445 | 230 | 245 | 36 | 9 | 277.5 | 85 | 29 front/ 188 rear |
9 | |
| STB9 | Trough | 500 | 200 | 150 | 161 | 34 | 9 | 85 | 100 | 25 | 7 | |
| STM13 | Trough | 1500 | 150 | 100 | 130 | 18 | 11 | 85 | 75 | 35 | 12 | |
| STL15 | Trough | <2400 | 150 | 35 | 50 | 28 | 9 | any | any | n/a | 20 | |
All dimensions in millimetres.
Sizes shown are nominal. There can be slight variations from sink to sink due to the nature of epoxy resin.
Sink weights will vary with colour. Weights shown are for grey.
Outlet position assumes the sink is oriented with the longer side facing the front of the worktop.
Sinks are designed to accept a waste fitting - 73mm dia. flange / 1.5" BSP.
Sinks can also be drilled to accept an overflow fitting. Simmons can supply sinks complete with a waste and overflow if requested